Used for softening bituminous materials before tests.
Used for softening bituminous materials before tests. The stainless steel vessel can receive up to 600 g of bitumen. Built in thermoregulator. Heat protection.
This apparatus is used for the examination of cut-back asphaltic materials by the distillation test.
Standards ASTM D402 AASHTO T78
his apparatus is used for the examination of cut-back asphaltic materials by the distillation test.
It consists of:
Weight approx.: 6 kg
Used to obtain bitumen or oil samples.
Standards ASTM D140 AASHTO T40
Used to obtain bitumen or oil samples from various levels. Made from brass.
Used for determining the breaking point of solid and semi-solid bitumens.
Standards EN 12593
Used for determining the breaking point of solid and semi-solid bitumens. The Fraas Breaking Point is the temperature at which bitumen first becomes brittle, as indicated by the appearance of cracks when a thin-film of the bitumen on a metal plaque is cooled and flexed in accordance with specified conditions.
The apparatus consists of a bending device, a plaque made of springly stainless steel 41x20x0.15 mm, a cooling device, a thermometer IP 42 C, a plate and stand.
For determining the density or relative density of bitumen.
Standards EN ISO 3838 ASTM D70 AASHTO T228
Used to determine the solubility of binders.
Standards EN 12592 ASTM D2042
The set is proposed in two versions:
ASTM D2042 , code 81-B0148 including:
EN 12592, code 81-B0148/A including:
Used for determining the water content of binders by distillation.
Standards AASHTO T48 ASTM D244 AASHTO T55 AASHTO T59
Used for determining the water content of bituminous and petroleum materials by distillation with a water immiscible, volatile solvent.
Comprising:
