Used to determine the specific gravity of hydraulic cement and lime.
Standards EN 196-6 ASTM C188 AASHTO T133
Used to determine the specific gravity of hydraulic cement and lime. Glass flask 250 ml capacity, with graduated neck from 0 to 1 ml and from 18 to 24 ml in 0.1 ml graduation with accuracy of 0.05 ml.
Used for determining the expansion of cement. The mould consists of a spring tensioned..
Standards EN 196-3
Introduction
Used for determining the expansion of cement. The mould consists of a spring tensioned split cylinder 30 mm internal diameter, 30 mm high with two indicator stems which measure 165 mm from the points of thje centre line of the cylinder and O ring. Two or three moulds are required for each test. To perform the test, a water bath is also required. See accessories.
We propose three packages:
62-L0025 Le Chatelier mould
Single unit. Individually checked, supplied complete with certificate of conformity and identified by a serial number.
62-L0025/C Le Chatelier mould. Pack of 6 units
Same as 62-L0025.
62-L0025/B Le Chatelier soundness kit
The kit includes all accessories to perform the test and to verify the conformity of the moulds.
Consisting of:
Note: each one of the above parts can be purchased individually.
This mould is used for the Expansion of Portland cement
Standards ASTM C151 ASTM C490 ASTM C227 ASTM C596 ASTM C1567 ASTM C1260
This mould is used for the Expansion of Portland cement with the High pressure autoclave, conforming to ASTM C151 and ASTM C490 and to evaluate expansion due to Alkali-Silica Reaction
The autoclave consists of a high-pressure steam vessel for cement expansion tests.
Standards ASTM C151
The autoclave consists of a high-pressure steam vessel with internal dimensions 154 mm dia. x 430 mm high to accept a rack for holding 10 specimens obtained with the 62-L0033/B moulds (see accessories). Complete with pressure gauge, pressure regulator, temperature regulator, control switches, safety valve and specimen rack.
Certified conforming to INAIL procedure.
