Ideal for curing cement specimens in commercial and site laboratories, very practical and easy to us
Standards ASTM C109 EN 196-1 ASTM C511 EN 196-8 EN ISO 679
Four compartments bench-type curing cabinet. 230V/50-60HZ/1PH.
Four compartments bench-type curing cabinet. 110V/60HZ/1PH.
Upgrade of the Cabinet for storing of humidity and temperature values (one every 10 minutes) and download of data via Webserver (max storage of 12 months then data will be overwritten). The upgrade shall ba factory installed &n…
Plastic pan 220x220x70 mm for water curing of three 40x40x160 mm cement specimens.
Filtration kit. Suggested in case mains water hardness is higher than 20 °f.
Ideal for curing cement specimens in commercial and site laboratories, very practical and easy...
Standards ASTM C109 EN 196-1 ASTM C511 EN 196-8 EN ISO 679
Ideal for curing cement specimens in commercial and site laboratories, very practical and easy to use. The frame is made of strong polypropylene structure, which is chemical resistant and particularly suitable for cement applications. The front doors are fitted with transparent glass. The humidity is maintained from 95% to saturation by water nebulizer. The temperature is maintained to 20±1°C (or 23±1°C) by a immersion heater and separated refrigerator unit (see accessories, code 65-D2031). The four stainless steel racks of the internal frame can support the moulds with specimens and a large number of cement prisms. It can also be used to concrete cubes and other mortar specimens. Using a simple plastic pan (see accessory 65-D1326) is also possible to cure specimen in water.
The unit has to be connected to a suitable air compressor as, for example, our model 65-L0013/D1 (see accessories).
CURACEM, cement curing cabinet EN 196-1. Requires input of water at 8°C. See refrigerator 86-D2031. Air compressor not included. 230V/50-60Hz/1F
CURACEM, cement curing cabinetto EN 196-1. Requires input of water at 8°C. See refrigerator 86-D2031. Air compressor not included. 110V/60Hz/1F
Plastic pan 220x220x70 mm for water curing of three 40x40x160 mm cement specimens.
Complete with re-circulating unit for temperature uniformity.
Standards EN 12697-23 EN 196-1 EN 196-8
AMPTQube, based on the revolutionary EmS Electro-mechanical Servoactuated technology is suitable for QC / QA tests. AMPTQube grants a level of testing accuracy, quality, performance and range normally only achievable from complex and expensive machines.
AMPTQube has been designed to be a fast and reliable method of testing the NCHRP Projects 9-19 and 9-29, AASHTO T378 / TP79 Dynamic Moduls, Flow and Flow Time with ease.
In addition AMPTQube can also perform Uniaxial Fatigue / SVECD, Overlay Test, Semi-Circular Bend, Indirect Tensile Dynamic Modulus, iRLPD, Small Diameter Dynamic Modulus, tests with the addition of optional hardware accessories.
The Asphalt Mixture Performance Tester – AMPT Qube can be used as part of your Superpave performance based testing program.
Standard outfit
AMPTQube includes, as standard, the following testing (compression platens) which, however, has been completed with the transducer kit accessory.
Dynamic Modulus E to AASHTO T378 / TP79 and NCHRP 9-29
A performance related property, for asphalt mixture evaluation and charachterising the stiffness of HMA. It is an important input parameter for AASHTO “Mechanistic-Empirical Pavement Design Guide”.
Flow number to AASHTO TPXX and NCHRC 9-29
HMA to permanent deformation.
Flow time to NCHRP 9-29
Flow time is a quick and simple measurement of the resistance of HMA to permanent deformation.
Water bath with 2 channels thermoregulator (heating/cooling), submersed recirculating pump and cooler unit. 230V/50-60Hz/1ph.
