ASTM and AASTHO compression machines

These automatic COMPACT-Line compression testers fulfil all the strict requirements of ASTM Standards (ASTM C39, C140, AASHTO T22) in terms of load measurement accuracy, load rate application, compression platens hardness and flatness. They feature two types of spherical seats designed to strictly match the geometrical dimensions specified by ASTM Standards for testing, respectively, cylinders and blocks to ensure uniform load distribution all over the specimen and consequently accurate test results.

All the machines are supplied with their traceable test certificate for load measurement accuracy.

ASTM - Standard Automatic Compression Testers for Cylinders WIZARD AUTO

WIZARD AUTO Standard Automatic compression machines

Standards AASHTO T22 ASTM C39

1500 kN (330 klbf) ASTM compression machine model 50-A12Wxx with pedestal 50-A19/B and frontal door 50-A19/FG
Description

 

Main features include:

  • Rigid welded steel construction
  • ASTM spherical seat fully complaint to ASTM C39 for testing 4” x 8” and 6” x 12” cylinders
  • Accuracy Class A (ASTM) starting from 10% of full scale (from 1% on request)
  • Two channels for load sensors
  • Wide graphic display 128 x 80 pixel
  • Graphic printer available as option
  • AC motor fitted with VFD INVERTER device: high efficiency, low consumption, silent operation
  • Dual stage pump for fast approach and automatic switch to high pressure for loading
  • Second frame optional facility


Frame
Rigid welded steel construction. ASTM spherical seat allows free alignment at the initial contact with the specimen. It is designed strictly conforming to the Standards, to test 4” and 6” diameter specimens.

Compression platens
See table. Traceable certificate of surface hardness available on request.

Safety features 
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front and rear transparent flexible fragment guard.

Main Features

WIZARD AUTO is CONTROLS new standard automatic Quality Control machine for compression and flexural testing and includes many new features and enhancements to improve the user-friendliness, efficiency, operator comfort and energy savings.
 
QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.
 
Wizard Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.

Mainly dedicated to routine failure tests (compression, flexure and indirect tensile), WIZARD AUTO is the perfect solution to ensure total certainty of testing accuracy and strict conformity to international Standards. In fact being an automatic system it allows:

    • Reduced opportunities for operator errors, improving accuracy of results and repeatability         
    • Easy-to-use: even for operators with limited expertise.
    • Conforming to Standards: the machine automatically performs the test at correct test speed. Conformance to Standards can be easily proven.
    • High performance: high speed pump closes the daylight above the specimen at the fasted speed allowing a very high throughput of tests.
    • Operator comfort due to the significant noise reduction.
    • Energy saving, with 50% reduction in energy consumption.
Products

 

50-A12W02

WIZARD AUTO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 230 V, 50-60 Hz, 1 Ph.

 
50-A12W04

WIZARD AUTO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 110 V, 60 Hz, 1 Ph.

 
50-A12W12

WIZARD AUTO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 230 V, 50-60 Hz, 1 Ph.

 
50-A12W14

WIZARD AUTO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 110 V, 60 Hz, 1 Ph.

 
50-A12W22

WIZARD AUTO COMPACT-Line automatic compression machine, 250’000 lbf (1100 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 230 V, 50-60 Hz, 1 Ph.

 
50-A12W24

WIZARD AUTO COMPACT-Line automatic compression machine, 250’000 lbf (1100 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 110 V, 60 Hz, 1 Ph.

 
50-A12W32

WIZARD AUTO COMPACT-Line automatic compression machine, 1100 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 230 V, 50-60 Hz, 1 Ph.

 
50-A12W34

WIZARD AUTO COMPACT-Line automatic compression machine, 1100 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 110 V, 60 Hz, 1 Ph.

 

Technical Specifications

WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics

  • Max pressure 700 bar
  • Power 750 W
  • Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low delivery for loading.
  • AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
  • Second frame optional facility using valve selector.

 

Hardware

  • Two 16 bit analog channels for load sensors
  • Wide graphic display 128 x 80 pixel
  • Sampling rate 50 Hz
  • Internal memory
  • RS 232 port for data download (including load/time graph points) to PC in ASCII format
  • Integrated printer as optional. See accessories

 

Firmware

  • Real time display of load and stress
  • Automatic application of the selected load rate
  • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
  • Peak detection and saving
  • Language selection
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads
  • Multiple units: Lbf / Ton / kN. 


PHYSICAL SPECIFICATION TABLE

Model 50-A12W32 
(A12W22**)
A12W34 (A12W24**)		A12W02 (A12W12**)
A12W04 (A12W14**)
Capacity kN (lbf)1100
(250,000)		1500 (330,000)
Max vertical daylight, mm (inches)375 (14,7”)375 (14,7”)
Horizontal daylight mm, (inches)265 (10.4”)265 (10.4”)
Max. piston travel*, mm (inches)50 (2″)50 (2″)
Upper platen dimensions, mm (inches)dia.165×30 (6.5″x1.2″) dia.165×30 (6.5″x1.2″) 

Bottom platen dimensions, mm

(inches)

dia. 250×30

(9.8″x1.2″)***

dia. 250×30

(9.8″x1.2″)***

Platen surface hardness55.5 HRC (600 HV)55.5 HRC (600 HV)
Platens flatness toll, mm (inches)0.02 (0.0008″)0.02 (0.0008″)
Overall dimensions, mm (inches)810 x 425 x 1085
(31.9″ x 16.7 x 42.7″)		810 x 425 x 1085
(31.9″ x 16.7 x 42.7″)
Weight approx., kg285285

*Use distance pieces conforming to the specimen size to avoid piston overtravel
** These machines are calibrated in lbf unit.
*** With threaded centering hole to be used with distance pieces with threaded pin

 

Accessories

 

50-C0050/HRD2

Supply of the compression machine with dia.165mm platens complete with traceable certificate of hardness of testing platens surfaces (upper and bottom platen certification included). Available only for ordering with compression machine. 

 
50-C0050/CAL
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load)
 
50-A19/B

Base for frames and testing machines model 50-A12xxx, 50-C13xxx and 50-C92xxx        

 
50-C10W/2F
Second frame facility for WIZARD AUTO series. Frame selection via manual lever
 
50-Q60W/PR
Upgrading the WIZARD AUTO series to incorporate a serial graphic printer in the rear panel
 
50-C50/P1
Application of a magnetic switch to the safety guard (for automatic testers only). Suitable for automatic compression machines.
 
50-C9080
Distance piece dia 200 x 30 mm
 
50-C9082
Distance piece dia 200 x 50 mm
 
50-C9083
Distance piece dia 200 x 68 mm
 
50-C9086
Distance piece dia 200 x 100 mm.
 
50-A19/FG

Upgrading of the 50-A12xxx, 50-C13xxx machines and compression frames with front rigid door     

 

ASTM - Automatic Compression Testers for Cylinders PILOT PRO

PILOT PRO is the best choice for Qualtiy Control laboratories for routine failure tests

Standards AASHTO T22 ASTM C39

Automatic compression testers for cylinders PILOT PRO, 1500 kN (330 klbf)
Description
PILOT PRO is the best choice for Quality Control laboratories to carry out a high throughput of routine failure tests including compression, flexure and indirect tensile tests.

 

PILOT PRO introduces new features and capabilities that will revolutionize the operations of any progressive construction quality testing laboratories.
LinkLAB is CONTROLS’ new proprietary Laboratory Connectivity Package. 
It allows your PILOT PRO to be a connected part of your laboratory infrastructure by taking inputs from any number of ancillary measuring systems and devices increasing efficiency and eliminating transposing errors.
 

The machines consist of:

Frame
Rigid welded steel construction. ASTM spherical seat allows free alignment at the initial contact with the specimen. It is designed strictly conforming to the Standards, to test 4” and 6” diameter specimens.

Compression platens
See table. Traceable certificate of surface hardness available on request.

PILOT PRO, Automatic power and control system 
See technical specifications.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front and rear transparent flexible fragment guard.

Main Features

Smart automatic and connected concrete Power and Control System for standard failure testing.
 

PILOT PRO is the best choice for Qualtiy Control laboratories to carry out a high throughput of routine failure tests including compression, flexure and indirect tensile tests.
    • Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
    • Automatic – time saving: test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
    • Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
    • Intuitive, quick and simple operation: The integrated control system features an intuitive 5.1” color graphical display, which works like a tablet or smart-phone, and makes PILOT PRO quick and simple to operate.
    • Standards compliant – peace of mind: Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39 and EN 12390-3.
    • Multilingual functionality: The system is available in multiple languages and is fully compatible with non-Latin characters for Chinese, Cyrillic (and more).
Products

 

50-A12P02

PILOT PRO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 230 V, 50-60 Hz, 1 Ph. 

 
50-A12P04

PILOT PRO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 110 V, 60 Hz, 1 Ph.

 

 
50-A12P12

PILOT PRO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 230 V, 50-60 Hz, 1 Ph.

 
50-A12P14

PILOT PRO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 110 V, 60 Hz, 1 Ph.

 
50-A42P02

PILOT PRO COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22  – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, 1 Ph.

 
50-A42P04

PILOT PRO COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22  – High-stiffness 4-welded-columns frame – 110 V, 60 Hz, 1 Ph.

 
50-A42P12

PILOT PRO COMPACT-Line automatic compression machine, 450’000 lbf (2000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22  – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, .

50-A42P14

PILOT PRO COMPACT-Line automatic compression machine, 450’000 lbf (2000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22  – High-stiffness 4-welded-columns frame – 110 V,

 
50-A52P02

PILOT PRO COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – 230 V, 50-60 Hz, 1 Ph.

 
50-A52P04

PILOT PRO COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – 110 V, 60 Hz, 1 Ph.

 
50-A52P12

PILOT PRO COMPACT-Line automatic compression machine, 660’000 lbf (3000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – 230 V, 50-60 Hz, 1 Ph.

 
50-A52P14

PILOT PRO COMPACT-Line automatic compression machine, 660’000 lbf (3000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – 110 V, 60 Hz, 1 Ph.

Technical Specifications

PILOT PRO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics

  • Dual-stage pump: centrifugal low pressure for fast approach automatically switches to radial multi-piston high pressure for loading
  • DC motor, 720W, 50-60Hz
  • Maximum working pressure 700 bar
  • Load/unload valve
  • Second/third frame selection valve available as option

 

Hardware

  • 524,000 points high-resolution/stability analog channels
  • 3 channels for load sensors
  • Control frequency 250 Hz
  • Sampling frequency 250 Hz
  • 5.1”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
  • Unlimited storage capacity for test data on internal 16 GB SD card
  • USB port for test data storage on external USB memory stick and for firmware upgrade
  • Ethernet port for PC / Internet /network communication
  • Optional integrated graphic printer including Load-Time plot
  • RS 232 port for data downloading in ASCII format

 

Firmware

  • Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
  • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
  • Pause command to maintain steady load can be enabled at a pre-set value before the test or as required while testing
  • Simultaneous display of load, specific load, actual load rate, load/time graph
  • Saving of the specimen failure type (to EN or ASTM) in the test results
  • Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
  • PC / network communication via Ethernet
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
  • Recording facility for up to 9 test profiles for each channel including: type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time
  • Improved PID algorithm and multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials  (e.g. cylinder with neoprene pads, low strength specimens) and test methods (e.g ACV, flexure, indirect tensile).
  • Compatible with the newly released Datamanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
  • Peripheral devices integration with Link-LAB
  • Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
  • Language selection (including Cyrillic and Chinese)
  • Unit selection (kN, ton, lbf)
  • USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.

 

PHYSICAL SPECIFICATION TABLE

Model 50-A12P02 (A12P12*)
A12P04 (A12P14*)		A42P02 (A42P12*)
A42P04 (A42P14*)		A52P02 (A52P12*)
A52P04 (A52P14**)
Capacity kN (lbf)1500, (330,000)2000, (450,000)3000, (660,000)
Max vertical daylight, mm (inches)375 (14.7″)375 (14.7″)375 (14.7″)
Horizontal daylight, mm (inches)265 (10.4”)350 (13.8”)370 (14.6”)
Max. piston travel**, mm (inches)50 (2″)50 (2″)50 (2″)
Upper platen dimensions, mm (inches)dia.165×30 (6.5″x1.2″) dia.165×30 (6.5″x1.2″) dia.165×30 (6.5″x1.2″) 

Lower platen dimensions,

mm (inches)

dia. 250×30

(9.8″x1.2″)

dia.300×50

(11.8″x2″)***

dia.300×50

(11.8″x2″)***

Platen surface hardness55.5 HRC (600 HV)55.5 HRC (600 HV)55.5 HRC (600 HV)
Platens flatness toll, mm (inches)0.02 (0.0008″)0.02 (0.0008″)0.02 (0.0008″)
Overall dimensions, mm760 x 370 x 1085
(30″ x 14.6″ x 42.7″)		930x420x1530
(36.6″ x 16.5″ x 60.2″)		1020x475x1550
(40.16″ x 18.7″ x 61″)
Weight approx., kg2907401105

* These machines are calibrated in lbf unit.
**Use distance pieces conforming to the specimen size to avoid piston overtravel
*** With threaded centering hole to be used with distance pieces with threaded pin

Accessories
50-C0050/CAL
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load)
 
50-SW/DM

DATAMANAGER PC software compatible with DIGIMAX, PILOT, AUTOMAX, PILOT PRO, AUTOMAX PRO and PRO-M. Suitable for remote control of the system (except DIGIMAX), data acquisition, processing and filing. LAN cable included.

 
50-C9080/68

Distance piece dia.200x68mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

50-A19/B

Base for frames and testing machines model 50-A12xxx, 50-C13xxx and 50-C92xxx        

50-C49/B

Base for 2000 kN 50-C46xxx, 50-C47xxx, 50-C43xxx, 50-A42xxx and 50-C45xxx frames/machines

 
50-C59/B
Base for 3000kN EN frames
 
50-C10C/2F
Second frame facility for PILOT series. Frame selection via manual lever
 
50-C10C/3F
Three-way valve for PILOT System to control a second and a third testing frame. Frame selection via manual lever.
 
50-Q60P/PRINT

Upgrading the AUTOMAX PRO and PILOT PRO series to incorporate a serial graphic printer in the rear panel allowing load/time plot (printing available for languages with latin charcters only)

 
50-C50/P1
Application of a magnetic switch to the safety guard (for automatic testers only). Suitable for automatic compression machines.
 
50-C9080
Distance piece dia 200 x 30 mm
 
50-C9080/30

Distance piece dia.200x30mm complete with both central centering pin for simple stacking up and two screws for solid fixing.                      

50-C9082
Distance piece dia 200 x 50 mm
 
50-C9080/50

Distance piece dia.200x50mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

50-C9083
Distance piece dia 200 x 68 mm
 
50-C9086
Distance piece dia 200 x 100 mm.
 
50-C9080/100

Distance piece dia.200x100mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

 
50-KLAB/E

LinK-LAB Enterprise laboratory connectivity package for machines controlled by PC via DATAMANAGER Software.

 
50-A19/FG

Upgrading of the 50-A12xxx, 50-C13xxx machines and compression frames with front rigid door          

ASTM - Automatic Compression Testers for Cylinders and Blocks PILOT PRO

Main features include: Rigid welded steel construction ASTM spherical seat fully compl

Standards AASHTO T22 ASTM C39 ASTM C140

Automatic compression testers for cylinders PILOT PRO, 1500 kN (330 klbf)
Description
 
PILOT PRO is the best choice for Qualtiy Control laboratories to carry out a high throughput of routine failure tests including compression, flexure and indirect tensile tests.

 

PILOT PRO introduces new features and capabilities that will revolutionize the operations of any progressive construction quality testing laboratories.
LinkLAB is CONTROLS’ new proprietary Laboratory Connectivity Package. 
It allows your PILOT PRO to be a connected part of your laboratory infrastructure by taking inputs from any number of ancillary measuring systems and devices increasing efficiency and eliminating transposing errors.
 

The machines consist of:

Frame
Rigid welded steel construction. Premium Heavy Duty spherical seat and rectangular platens 310x410x90 mm (12.2”x16.1”x3.5”) for testing blocks according to ASTM C140 and ASTM C1314.

Compression platens
Rectangular platens 310x410x90 mm (12.2”x16.1”x3.5”) for testing blocks according to ASTM C140 and ASTM C1314. Traceable certificate of surface hardness available on request.

 

Conversion set to test cylinders up to 6” x12” to ASTM C39 (on request, see accessory 50-A29/CYL)
Accessory for compression machine models 50-A29Pxx and A39Pxx for testing cylinders up to dia. 6″x12″ (150X300 mm) to ASTM C39 and AASHTO T-22 including:
– spherical seat and compression platen dia. 165mm
– system for easy removal and repositioning of the upper block testing platen and spherical seat based on rails
– mounting tools                                  
– steel base for the compression machine/frame    


PILOT PRO, Automatic power and control system 
See technical specifications.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front door and rear transparent fragment guard.

Main Features

Smart automatic and connected concrete Power and Control System for standard failure testing.
 

PILOT PRO is the best choice for Qualtiy Control laboratories to carry out a high throughput of routine failure tests including compression, flexure and indirect tensile tests.
    • Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
    • Automatic – time saving: test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
    • Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
    • Intuitive, quick and simple operation: The integrated control system features an intuitive 5.1” color graphical display, which works like a tablet or smart-phone, and makes PILOT PRO quick and simple to operate.
    • Standards compliant – peace of mind: Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39 and EN 12390-3.
    • Multilingual functionality: The system is available in multiple languages and is fully compatible with non-Latin characters for Chinese, Cyrillic (and more).
Products

 

50-A12P02

PILOT PRO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 230 V, 50-60 Hz, 1 Ph. 

 
50-A12P04

PILOT PRO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22. 110 V, 60 Hz, 1 Ph.

 

 
50-A12P12

PILOT PRO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 230 V, 50-60 Hz, 1 Ph.

 
50-A12P14

PILOT PRO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. 110 V, 60 Hz, 1 Ph.

 
50-A42P02

PILOT PRO COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22  – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, 1 Ph.

 
50-A42P04

PILOT PRO COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22  – High-stiffness 4-welded-columns frame – 110 V, 60 Hz, 1 Ph.

 
50-A42P12

PILOT PRO COMPACT-Line automatic compression machine, 450’000 lbf (2000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22  – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, .

50-A42P14

PILOT PRO COMPACT-Line automatic compression machine, 450’000 lbf (2000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22  – High-stiffness 4-welded-columns frame – 110 V,

 
50-A52P02

PILOT PRO COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – 230 V, 50-60 Hz, 1 Ph.

 
50-A52P04

PILOT PRO COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – 110 V, 60 Hz, 1 Ph.

 
50-A52P12

PILOT PRO COMPACT-Line automatic compression machine, 660’000 lbf (3000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – 230 V, 50-60 Hz, 1 Ph.

 
50-A52P14

PILOT PRO COMPACT-Line automatic compression machine, 660’000 lbf (3000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – 110 V, 60 Hz, 1 Ph.

Technical Specifications

 

PILOT PRO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics

  • Dual-stage pump: centrifugal low pressure for fast approach automatically switches to radial multi-piston high pressure for loading
  • DC motor, 720W, 50-60Hz
  • Maximum working pressure 700 bar
  • Load/unload valve
  • Second/third frame selection valve available as option

 

Hardware

  • 524,000 points high-resolution/stability analog channels
  • 3 channels for load sensors
  • Control frequency 250 Hz
  • Sampling frequency 250 Hz
  • 5.1”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
  • Unlimited storage capacity for test data on internal 16 GB SD card
  • USB port for test data storage on external USB memory stick and for firmware upgrade
  • Ethernet port for PC / Internet /network communication
  • Optional integrated graphic printer including Load-Time plot
  • RS 232 port for data downloading in ASCII format

 

Firmware

  • Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
  • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
  • Pause command to maintain steady load can be enabled at a pre-set value before the test or as required while testing
  • Simultaneous display of load, specific load, actual load rate, load/time graph
  • Saving of the specimen failure type (to EN or ASTM) in the test results
  • Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
  • PC / network communication via Ethernet
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
  • Recording facility for up to 9 test profiles for each channel including: type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time
  • Improved PID algorithm and multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials  (e.g. cylinder with neoprene pads, low strength specimens) and test methods (e.g ACV, flexure, indirect tensile).
  • Compatible with the newly released Datamanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
  • Peripheral devices integration with Link-LAB
  • Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
  • Language selection (including Cyrillic and Chinese)
  • Unit selection (kN, ton, lbf)
  • USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.

 

PHYSICAL SPECIFICATION TABLE

Model 50-A29P02 (A29P12**)
A29P04 (A29P14**)		A39P02 (A39P12**)
A39P04 (A39P14**)
Capacity kN (lbf)2000 (450,000)3000 (660,000)
Max vertical daylight, mm* (inches)300 (11.8″)260 (10.2”)
Max. vertical daylight with 50-A29/CYL set410 (16.1″)410 (16.1″)
Horizontal daylight, mm (inches)370 (14.6”)370 (14.6”)
Max. piston travel*, mm (inches)50 (2″)50 (2″)
Platen dimensions, mm (inches)310 x 410 x 90 mm
 (12.2” x 16.1” x 3.5”)		310 x 410 x 90 mm
 (12.2” x 16.1” x 3.5”)
Platen surface hardness55.5 HRC (600 HV)55.5 HRC (600 HV)
Platens flatness toll, mm 0.05 0.05 
Overall dimensions, mm 800x520x1760800x520x1760
Weight approx., kg980980

*Use distance pieces conforming to the specimen size to avoid piston overtravel.
** These machines are calibrated in lbf unit.

Accessories
 
 
50-C0050/CAL
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load)
 
50-SW/DM

DATAMANAGER PC software compatible with DIGIMAX, PILOT, AUTOMAX, PILOT PRO, AUTOMAX PRO and PRO-M. Suitable for remote control of the system (except DIGIMAX), data acquisition, processing and filing. LAN cable included.

50-L1000/100B
Slotted distance piece dia. 7.7″x4″ height (dia. 195×100 mm height)
 
50-L1000/40B
Slotted distance piece dia. 7.7″x1.6″ height (dia.195×40 mm height)
 
50-L1000/50B
Slotted distance piece dia. 7.7″x2″ height (dia. 195×50 mm height)
 
50-L1000/68B
Slotted distance piece dia. 7.7″x2.7″ height (dia.195×68 mm height)
 
50-C10C/2F
Second frame facility for PILOT series. Frame selection via manual lever
 
50-C10C/3F
Three-way valve for PILOT System to control a second and a third testing frame. Frame selection via manual lever.
 
50-Q60P/PRINT

Upgrading the AUTOMAX PRO and PILOT PRO series to incorporate a serial graphic printer in the rear panel allowing load/time plot (printing available for languages with latin charcters only)

 
50-C50/P1
Application of a magnetic switch to the safety guard (for automatic testers only). Suitable for automatic compression machines.
 
50-KLAB/E

LinK-LAB Enterprise laboratory connectivity package for machines controlled by PC via DATAMANAGER Software.

ASTM - Top-of-the-Range Automatic Compression Testers for Cylinders AUTOMAX PRO

AUTOMAX PRO is top-of-the-range Compact-Line compression machines

Standards AASHTO T22 ASTM C39

AUTOMAX PRO
Description

 

AUTOMAX PRO is CONTROLS’ new top-of-the-range Compact-Line compression machines and is the first choice for automatic standard failure tests.

AUTOMAX PRO introduces new features and capabilities that will revolutionize the operations of any progressive construction quality testing laboratories.
LinkLAB is CONTROLS’ new proprietary Laboratory Connectivity Package. 
It allows your AUTOMAX Pro to be a connected part of your laboratory infrastructure by taking inputs from any number of ancillary measuring systems and devices increasing efficiency and eliminating transposing errors.
 

The machines consist of:

Frame
Four column high stiffness welded frame tested for stability to EN 12390-4.
Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.

Compression platens
See table. Traceable certificate of surface hardness available on request.

Automax PRO, Automatic power and control system 
See technical specifications.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front door and rear transparent fragment guard.

Main Features

 

Smart automatic and connected concrete Power and Control System for standard failure testing.

AUTOMAX PRO is CONTROLS’ new top-of-the-range Compact-Line compression machine and is the first choice for automatic standard failure tests.

  • Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
  • Fully automatic – time saving: Full test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
  • Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
  • Intuitive, quick and simple operation: The integrated control system features an intuitive 7” color graphical display, which works like a tablet or smart-phone, and makes AUTOMAX PRO quick and simple to operate.
  • Standards compliant – peace of mind: Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39 and EN 12390-3.
  • Multilingual functionality: The system is available in multiple languages and is fully compatible with non-Latin characters for Chinese, Cyrillic (and more).
Products
 
 
50-A12F02

AUTOMAX PRO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x  320 mm. Conforming to ASTM C39, AASHTO T22. 230V/50-60Hz/1Ph.                       

50-A12F04

AUTOMAX PRO COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x  320 mm. Conforming to ASTM C39, AASHTO T22. 110V/60Hz/1Ph.                       

50-A12F14

AUTOMAX PRO COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T22. 110V/60Hz/1Ph.                

50-A42F02

AUTOMAX PRO COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, 1 Ph.

 
50-A42F04

AUTOMAX PRO COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – High-stiffness 4-welded-columns frame – 110 V, 60 Hz, 1 Ph.

 
50-A42F12

AUTOMAX PRO COMPACT-Line automatic compression machine, 450’000 lbf (2000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – 230 V, 50-60 Hz, 1 Ph.

50-A42F14

AUTOMAX PRO COMPACT-Line automatic compression machine, 450’000 lbf (2000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – High-stiffness 4-welded-columns frame – 110 V, 60 Hz, 1 Ph.

50-A52F02

AUTOMAX PRO COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, 1 Ph.

 
50-A52F04

AUTOMAX PRO COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Conforming to ASTM C39, AASHTO T22 – High-stiffness 4-welded-columns frame – 110 V, 60 Hz, 1 Ph.

 
50-A52F12

AUTOMAX PRO COMPACT-Line automatic compression machine, 660’000 lbf (3000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – High-stiffness 4-welded-columns frame – 230 V, 50-60 Hz, 1 P

50-A52F14

AUTOMAX PRO COMPACT-Line automatic compression machine, 660’000 lbf (3000 kN) cap. for testing cylinders up to 6″x12″ (160 x 320 mm). Conforming to ASTM C39, AASHTO T-22. – High-stiffness 4-welded-columns frame – 110 V, 60 Hz, 1 Ph

Technical Specifications

 

WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics

  • Max pressure 700 bar
  • Power 750 W
  • Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low delivery for loading.
  • AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
  • Second frame optional facility using valve selector.

Hardware

  • Two 16 bit analog channels for load sensors
  • Wide graphic display 128 x 80 pixel
  • Sampling rate 50 Hz
  • Internal memory
  • RS 232 port for data download (including load/time graph points) to PC in ASCII format
  • Integrated printer as optional. See accessories

Firmware

  • Real time display of load and stress
  • Automatic application of the selected load rate
  • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
  • Peak detection and saving
  • Language selection
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads
  • Multiple units: Lbf / Ton / kN. 

PHYSICAL SPECIFICATION TABLE

Model 50-A12W32 
(A12W22**)
A12W34 (A12W24**)		A12W02 (A12W12**)
A12W04 (A12W14**)
Capacity kN (lbf)1100
(250,000)		1500 (330,000)
Max vertical daylight, mm (inches)375 (14,7”)375 (14,7”)
Horizontal daylight mm, (inches)265 (10.4”)265 (10.4”)
Max. piston travel*, mm (inches)50 (2″)50 (2″)
Upper platen dimensions, mm (inches)dia.165×30 (6.5″x1.2″) dia.165×30 (6.5″x1.2″) 

Bottom platen dimensions, mm

(inches)

dia. 250×30

(9.8″x1.2″)***

dia. 250×30

(9.8″x1.2″)***

Platen surface hardness55.5 HRC (600 HV)55.5 HRC (600 HV)
Platens flatness toll, mm (inches)0.02 (0.0008″)0.02 (0.0008″)
Overall dimensions, mm (inches)810 x 425 x 1085
(31.9″ x 16.7 x 42.7″)		810 x 425 x 1085
(31.9″ x 16.7 x 42.7″)
Weight approx., kg285285

*Use distance pieces conforming to the specimen size to avoid piston overtravel
** These machines are calibrated in lbf unit.
*** With threaded centering hole to be used with distance pieces with threaded pin

Accessories
 
50-C0050/CAL
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load)
 
50-SW/DM

DATAMANAGER PC software compatible with DIGIMAX, PILOT, AUTOMAX, PILOT PRO, AUTOMAX PRO and PRO-M. Suitable for remote control of the system (except DIGIMAX), data acquisition, processing and filing. LAN cable included.

 
50-C9080/68

Distance piece dia.200x68mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

50-Q60P/PRINT

Upgrading the AUTOMAX PRO and PILOT PRO series to incorporate a serial graphic printer in the rear panel allowing load/time plot (printing available for languages with latin charcters only)

 
50-C50/P1
Application of a magnetic switch to the safety guard (for automatic testers only). Suitable for automatic compression machines.
 
50-C9080
Distance piece dia 200 x 30 mm
 
50-C9080/30

Distance piece dia.200x30mm complete with both central centering pin for simple stacking up and two screws for solid fixing.                      

50-C9082
Distance piece dia 200 x 50 mm
 
50-C9080/50

Distance piece dia.200x50mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

50-C9083
Distance piece dia 200 x 68 mm
 
50-C9086
Distance piece dia 200 x 100 mm.
 
50-C9080/100

Distance piece dia.200x100mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

 
50-C10D/3F
Third frame facility for AUTOMAX series. Frame selection via display/PC.
 
50-C20E/4F
Fourth frame facility for AUTOMAX Multitest e and AUOTMAX PRO series. Frame selection via PC.
 
50-KLAB/E

LinK-LAB Enterprise laboratory connectivity package for machines controlled by PC via DATAMANAGER Software.

ASTM - Top-of-the-Range Automatic Compression Testers for Cylinders AUTOMAX PRO-M for Advanced Testing

AUTOMAX PRO-M Compact-Line compression machines for Advanced Testing

Standards AASHTO T22 ASTM C39 ASTM C469

3000 kN ASTM compression machine model 50-A52F02/M performing Elastic modulus test
Description
 
AUTOMAX PRO-M Power Control System fitted with superior hydraulics can also perform, in addition to standard failure tests, the Modulus of Elasticity Determination tests, Characterizations of Fiber Reinforced Concrete (FRC) under displacement-control and tensile tests on steel specimens

AUTOMAX PRO-M introduces new features and capabilities that will revolutionize the operations of any progressive construction quality testing laboratories.

LinkLAB is CONTROLS’ new proprietary Laboratory Connectivity Package. 
It allows your AUTOMAX PRO-M to be a connected part of your laboratory infrastructure by taking inputs from any number of ancillary measuring systems and devices increasing efficiency and eliminating transposing errors.
 

The machines consist of:


Frame
Rigid welded steel construction. ASTM spherical seat allows free alignment at the initial contact with the specimen. It is designed strictly conforming to the Standards, to test 4” and 6” diameter specimens.

Compression platens
See table. Traceable certificate of surface hardness available on request.

Automax PRO-M, Automatic power and control system 
See technical specifications.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front door and rear transparent fragment guard.

Main Features

 

Smart automatic and connected concrete Power and Control System for standard failure testing.

AUTOMAX PRO-M is CONTROLS’ new top-of-the-range Compact-Line compression machine and is the first choice for automatic standard failure tests and advanced concrete mechanical properties assessment. 

  • Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
  • Fully automatic – time saving: Full test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
  • Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
  • Intuitive, quick and simple operation: The integrated control system features an intuitive 7” color graphical display, which works like a tablet or smart-phone, and makes AUTOMAX PRO-M quick and simple to operate.
  • Standards compliant – peace of mind: Automatic performance of Elastic Modulus tests according to the main International Standards with automatic calculation of tests results.
  • Advanced: Allowing the execution of displacement-controlled tests on beams, notched beams, round or square slabs
  • Easy rebar testing: simply attach the stand- alone tensile frame and carry out rebar testing as well as all the compression tests.
Products
 
 
50-A12F02/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x  320 mm. Suitable for Elastic Modulus and Poisson ratio determination. 230V/50-60Hz/1Ph.               

50-A12F04/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 1500 kN cap. for cylinders up to 160 x  320 mm. Suitable for Elastic Modulus and Poisson ratio determination. 110V/60Hz/1Ph.                &nbs…

 
50-A12F12/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for cylinders up to 6″x12″ (160 x 320 mm). Suitable for Elastic Modulus and Poisson ratio determination. 230V/50-60Hz/1Ph.   

 
50-A12F14/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 330’000 lbf (1500 kN) cap. for cylinders up to 6″x12″ (160 x 320 mm). Suitable for Elastic Modulus and Poisson ratio determination. 110V/60Hz/1Ph.    

 
50-A42F02/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Suitable for Elastic Modulus and Poisson ratio determination. 230 V, 50-60 Hz, 1 Ph.

 
50-A42F04/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm. Suitable for Elastic Modulus and Poisson ratio determination. 110 V, 60 Hz, 1 Ph.

 
50-A42F12/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 450’000 lbf cap. for testing cylinders up to 6″x12″. Suitable for Elastic Modulus and Poisson ratio determination. 230 V, 50-60 Hz, 1 Ph.

 
50-A42F14/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 450’000 lbf cap. for testing cylinders up to 6″x12″. Suitable for Elastic Modulus and Poisson ratio determination. 110 V, 60 Hz, 1 Ph.

 
50-A52F02/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Suitable for Elastic Modulus and Poisson ratio determination. 230 V, 50-60 Hz, 1 Ph.

 
50-A52F04/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm. Suitable for Elastic Modulus and Poisson ratio determination. 110 V, 60 Hz, 1 Ph.

 
50-A52F12/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 660’000 lbf cap. for testing cylinders up to 6″x12″. Suitable for Elastic Modulus and Poisson ratio determination. 230 V, 50-60 Hz, 1 Ph.

 
50-A52F14/M

AUTOMAX PRO-M COMPACT-Line automatic compression machine, 660’000 lbf cap. for testing cylinders up to 6″x12″. Suitable for Elastic Modulus and Poisson ratio determination. 110 V, 60 Hz, 1 Ph.

Technical Specifications

AUTOMAX PRO-M AUTOMATIC POWER AND CONTROL SYSTEM


Hydraulics

  • DC motor, 720W, 50-60Hz
  • Maximum working pressure 700 bar
  • Load/unload electrovalve for test execution via display/PC and automatic stop at specimen failure
  • Active control of up to 4 frames by selection via display/PC (third and fourth frame as option). See accessories.
  • ES Energy Saving technology to reduce the power consumption and enable silent operation
  • Flow-sharing technology to perform loading and unloading cycles at controlled rate


Hardware

  • 524,000 points high-resolution/stability analog channels
  • 6 channels to be factory configured:
    • 2 channels for load sensors
    • 2 channels for load or displacement/strain sensor
    • 2 channels for displacement/strain sensors
  • Control frequency 250 Hz
  • Sampling frequency 250 Hz
  • 7”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
  • Unlimited storage capacity for test data on internal 16 GB SD card
  • USB port for test data storage on external USB memory stick and for firmware upgrade
  • Ethernet port for PC / Internet /network communication
  • Optional integrated graphic printer including Load-Time plot (for standard failure tests)
  • RS 232 port for data downloading in ASCII format


Firmware

  • Execution of compression, flexure, indirect tensile, ACV tests, Elastic Modulus, Poisson Ratio Determination plus Displacement-controlled tests (with 50-FW/DC) and tensile tests (with 50-FW/UTS) in automatic mode with test speed controlled by a closed-loop PID system.
  • Simultaneous display of:
    • load, stress, actual load rate, load / time graph in standard failure test
    • load, stress, strain, stress / strain graph in Elastic Modulus and Poisson ratio tests
    • load, displacement, stress / displacement in displacement controlled tests (with 50-FW/DC)
    • load, stress, displacement and % elongation (crossbeam), displacement and % elongation (extensometer, if connected), stress/%elongation graph in tensile tests (with 50-FW/UTS)
  • Saving of the specimen failure type (to EN or ASTM) in concrete compressiont tests results
  • Automatic performance of Elastic Modulus tests according to the main International Standards with automatic calculation of tests results
  • Execution (with 50-SW/DC) of displacement controlled tests on beams, notched beams, round or square slabs
  • Execution (with 50-FW/UTS) of automatic tensile tests with:
    • Control up to yield by:
      * Stress (method B to EN 6892-1)
      * Strain by using extensometer (method A1 to EN 6892-1)
      * Strain by using crosshead (method A2 to EN 6892-1)
    • Control after yield by grips’ separation
    • elaboration of tension test results: ReH, ReL, Rp, final elongation, etc. conforming to EN ISO 6892-1 and EN 15630-1
  • Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
  • PC / network communication via Ethernet
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
  • Recording facility for up to 9 test profiles for each channel including: type of test (e.g. compression, flexural, splitting, elastic modulus, displacement control, tension), specimen size and shape, test speed and other general information. Each one of the recorded test profiles can be recalled automatically to save time.
  • Improved PID algorithm and multi PID selection. Up to three different PID settings can be tuned for each channel for a variety of materials (e.g. cylinder with neoprene pads, low strength specimens) and test methods (e.g ACV, flexure, elastic modulus, displacement control)
  • Compatible with the newly released DATAMANAGER software, E-Module, D-Control and UTS software packages, tailored for construction material testing laboratories, for remote control, real-time data acquisition and results calculation.
  • Peripheral devices integration with Link-LAB
  • Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
  • Language selection (including Cyrillic and Chinese)
  • Unit selection (kN, ton, lbf)
  • USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.

 

PHYSICAL SPECIFICATION TABLE

Model 50-A12F02/M (A12F12/M*)
A12F04/M (A12F14/M*)         		A42F02/M (A42F12/M*)
A42F04/M (A42F14/M*)		A52F02/M (A52F12/M*)
A52F04/M (A52F14/M*)
Capacity kN (lbf)1500 (330,000)2000 (450,000)3000 (660,000)
Max vertical daylight**, mm (inches)375 (14.7″)375 (14.7″)375 (14.7″)
Horizontal daylight, mm (inches)265 (10.4″)350 (13.8”)370 (14.6”)
Max. piston travel, mm (inches)50 (2″)50 (2″)50 (2″)
Upper platen dimensions, mm (inches)dia.165×30 (6.5″x1.2″) dia.165×30 (6.5″x1.2″)dia.165×30 (6.5″x1.2″)

Lower platen dimensions, mm

(inches)

dia. 250×30

(9.8″x1.2″)

dia.300×50

(11.8″x2″)***

dia.300×50

(11.8″x2″)***

Platen surface hardness55.5 HRC (600 HV)55.5 HRC (600 HV)55.5 HRC (600 HV)
Platens flatness toll, mm (inches)0.02 (0.0008″)0.02 (0.0008″)0.02 (0.0008″)
Overall dimensions, mm810x425x1085930x420x1530
(36.6″ x 16.5″ x 60.2″)		1020x475x1550
(40.16″ x 18.7″ x 61″)
Weight approx., kg2857401105


* These machines are calibrated in lbf unit.
**Use distance pieces conforming to the specimen size to avoid piston overtravel
*** With threaded centering hole to be used with distance pieces with threaded pin

Accessories
 
 
50-C0050/CAL
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load)
 
50-SW/DM

DATAMANAGER PC software compatible with DIGIMAX, PILOT, AUTOMAX, PILOT PRO, AUTOMAX PRO and PRO-M. Suitable for remote control of the system (except DIGIMAX), data acquisition, processing and filing. LAN cable included.

 
50-C9080/68

Distance piece dia.200x68mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

 
55-C0222/H

Electronic universal extensometer/compressometer for cylinders, prisms and cubes. Suppied with short distance piece for use with prisms 40x40x160 mm and 2 elastic bands

 
55-C0221/E
Axial compression device for cylinder dia.150x300mm complete with two high precision LDT displacement transducer 10mm travel
 
50-SW/DC

D-Control software package for energy absorption, displacement/strain controlled tests.

 
50-SW/EM

E-MODULE software package for Elastic modulus and Poisson ratio determination.

 
50-Q60P/PRINT

Upgrading the AUTOMAX PRO and PILOT PRO series to incorporate a serial graphic printer in the rear panel allowing load/time plot (printing available for languages with latin charcters only)

 
50-C50/P1
Application of a magnetic switch to the safety guard (for automatic testers only). Suitable for automatic compression machines.
 
50-C9080
Distance piece dia 200 x 30 mm
 
50-C9080/30

Distance piece dia.200x30mm complete with both central centering pin for simple stacking up and two screws for solid fixing.                      

 
50-C9082
Distance piece dia 200 x 50 mm
 
50-C9080/50

Distance piece dia.200x50mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

50-C9083
Distance piece dia 200 x 68 mm
 
50-C9086
Distance piece dia 200 x 100 mm.
 
50-C9080/100

Distance piece dia.200x100mm complete with both central centering pin for simple stacking up and two screws for solid fixing.          

 
50-C10D/3F
Third frame facility for AUTOMAX series. Frame selection via display/PC.
 
50-C20E/4F
Fourth frame facility for AUTOMAX Multitest e and AUOTMAX PRO series. Frame selection via PC.
 
55-C0221/F
Axial compression device for cylinder dia.100x200mm complete with two high precision LDT displacement transducer 10mm travel
 
50-KLAB/E

LinK-LAB Enterprise laboratory connectivity package for machines controlled by PC via DATAMANAGER Software.

Ask our materials testing experts. We’re here to help.

Contact Us