Concrete Compaction

Battery operated pocker vibrator model 55-C0162/BT
Proper compaction of concrete specimens, meant to be used for compression tests, is crucial in order to obtain higher compressive strength results. A denser concrete generally provides higher compressive strength thanks to the low ratio of voids. Vibrating tables or pocket vibrators can be successfully used for this purpose.

Poker Vibrators

Ideal for the internal compaction of concrete specimens both in laboratory and in site.

Standards EN 12390-2 ASTM C31 ASTM C192 AASHTO T23 AASHTO T126

Electric poker vibrator, dia. 25x250 mm, flexible shaft 2000 mm long model 55-C0162/E
Description
Ideal for the internal compaction of concrete specimens both in laboratory and in site, and a good alternative to the traditional tamping bar especially when there are large number of specimen to be compacted.
Three versions available:
  • mains operated 
  • petrol operated
  • battery operated

 

Main Features
  • Wide range of solutions in terms of power supply: electrical, petrol or battery operated
  • Lightweigth instruments, easy to use and carry
  •  
Products

 

55-C0162/BT
Battery operated pocker vibrator, 13000 vibrations/min, 18 V, 2 x 4.0 Ah battery pack
 
55-C0162/E
Electric poker vibrator. 2000 W. 2000 mm flexible shaft. 220-240V/50-60Hz/1Ph
 
55-C0162/EZ
Electric poker vibrator. 2000 W. 2000 mm flexible shaft. 110V/60Hz/1Ph
 
55-C0163/C
Petrol operated poker vibrator. Flexible shaft 2 mlong, tip dia. 25 x 250 mm

 

Technical Specifications

 

Models 55-C0162/E
C0162/EZ		C0163/CC0162/BT
Tip dimension mmDia. 25×250Dia. 25×250Dia. 25×220
Shaft length mm20002000

800 

Vibrations/min120001200013000
Power W230012002 x 5.0 Ah Batteries
Weight approx. kg8123

 

Vibrating Plate

Light and portable, operated by the car lighter, is ideal for field use.

55-C0157/B. Portable vibrating plate
Description

Light and portable, operated by the car lighter, is ideal for field use. Suitable for vibrating plastic mould up to 150 mm and cylinder moulds up to dia. 160×320 mm. Supplied complete with elastic cord to fit the mould on the vibrating plate.

Products

 

55-C0157/B
Portable vibrating plate, suitable for vibrating plastic cube moulds up to 150 mm and cylindrical up to dia. 160×320 mm. Supplied with elastic cord.12V, 3000 RPM, 30 W
Technical Specifications
  • Voltage: 12 V DC for connection to the vehicle cigar lighter or to a standard 12 V battery
  • Permanent magnet motor 12 V, 3000 rpm, 30 W
  • Dimensions (wxdxh): 250x250x200 mm
  • Weight approx.: 10 kg
  •  

Vibrating Tables

Robustly manufactured to operate with minimum noise levels, these tables operate at 3000 vibrat...

Standards EN 12390-2

55-C0158/A with 55-C0158/A1 clamping device and two 150 mm cube moulds.
Description
Robustly manufactured to operate with minimum noise levels, these tables operate at 3000 vibrations per minute at 50 Hz or 3600 at 60 Hz and have retaining edges to avoid the moulds from falling from the table.

All models can be completed with clamping device, pedal switch and multi-function control panel (see Accessories).

 

Main Features
  • Clamping devices: new universal and practical system, easy to mount and increased adaptability in accordance with the moulds used
  • Waterproof pedal: with electrical switch 
  • Multi-function control panel: 60 seconds timer and ON/OFF switch
  •  
Products

 

55-C0158/A
Vibrating table 630×400 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 230V,50Hz,1ph
 
55-C0158/AY
Vibrating table 630×400 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 220V,60Hz,1ph
 
55-C0158/AZ
Vibrating table 630×400 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 110V,60Hz,1ph
 
55-C0158/B
Vibrating table 830×830 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 230V,50Hz,1ph
 
55-C0158/BY
Vibrating table 830×830 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 220V,60Hz,1ph
 
55-C0158/BZ
Vibrating table 830×830 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 110V,60Hz,1ph
 
55-C0158/C
Vibrating table 1250×700 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 230V,50Hz,1ph
 
55-C0158/CY
Vibrating table 1250×700 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 220V,60Hz,1ph
 
55-C0158/CZ
Vibrating table 1250×700 mm for concrete moulds with retaining edges. Universal clamping brackets, waterproof pedal switch, ON/OFF and timer control panel available as options. 110V,60Hz,1ph
Technical Specifications

 

Models  55-C0158/A
C0158/AY
C0158/AZ		C0158/B
C0158/BY
C0158/BZ		C0158/C
C0158/CY
C0158/CZ
Dimensions mm630×400830×8301250×700
Vibration/min
@ 50Hz
@ 60 Hz                    
3000
3600
3000
3600
3000
3600
Power W1801802×180
Weight approx. kg336991

 

Accessories
 
55-C0158/A1
Clamping device suitable for rail locking system of vibrating table series 55-C0158/Ax
 
55-C0158/B1
Clamping device suitable for rail locking system of vibrating table series 55-C0158/Bx
 
55-C0158/P
Waterproof pedal switch for vibrating tables series 55-C0158/Ax, 55-C0158/Bx and 55-C0158/Cx. 110-230V/50-60Hz/1Ph
 
55-C0158/TIME
Control panel for vibrating tables series 55-C0158/Ax, 55-C0158/Bx and 55-C0158/Cx: 60 seconds timer and on/off switch.
 
55-C0158/C1

Clamping device for 55-C0158/Cx.
Weight: 8 kg.

Ask our materials testing experts. We’re here to help.

Contact Us