Used for measuring applied force on a soil sample
Load rings are used for load measurement in soil mechanics test such as, shear, triaxial, uncondiend, CBR ….
All model are made from special alloy steel and they are supplied analogue dial gauge 0.001 mm and calibration chart.
All models can be fitted with T1000/F (see accessories), a special stem brake unit which maintains the maximum reading after the failure of the specimen
Load ring can be directly connected to the adapter fit on the crosshead of triaxial frames. Using the 28-WF1049 connector (see accessories) they can be adapted to our complete range of triaxial cells.
Used for measuring axial deformation on soil sample.
Dial gauge are used for measuring vertical and/or horizontal deformation on soil machanics test
Supplied complete with rear mounts for connection to load rings
Used for measuring variation of volume on soil sample in traxial tests - Analog version
Standards ASTM D8079
The apparatus comprises two measurement tubes, which have a 25 ml burette mounted internally and an acrylic tube externally. The burette tubes are connected directly to a reversing valve system, which is used to reverse the direction of travel of the interface in the measurement tubes without affecting the direction of flow of water to or from the triaxial cell.
the unit also includes a by-pass valve system when volume change measurement is not required. Burettes are calibrated to Class A.
Used for measuring pore water pressure on a soil sample in triaxial tests
Standards ASTM D8079
Pore water pressure can be measured using pore pressure manometer with anti-twist device that can be fitted directly to triaxial cell.
