Steel and plastic beam moulds
The proposed models range from the traditional cast iron version conforming to EN 12390-1 standards
Standards EN 12390-1
The proposed models range from the traditional cast iron version conforming to EN 12390-1 standards , ideal for laboratory use, to the plastic models, very practical for field use and ideal for production control.
Cast iron models 55-C0100/M10 and 55-C0100/M15, can be supplied, on request, complete with certificate of compliance stating the individual verification with certified instruments. For the relevant identification codes, add the suffix C (e.g. 55-C0100/M10C).
250 mm plastic single cube mould. Weight 3 kg approx.
Polyuretane cover for Kubo15 mould.
Handle for plastic cube moulds KUBO 55-C0100/P15
Steel models can be supplied, on request, complete with certificate of compliance.
The proposed models range from the traditional steel models conforming to EN, ASTM and AASHTO standards, to the slitting plastic models, very practical for field use and ideal for production control. Steel models can be supplied, on request, complete with certificate of compliance stating the individual verification with certified instruments.
These instrumentation is used for the assessment of Flatness, Perpendicularity and Strightness
Standards EN 12390-1
These instrumentation is used for the assessment of Flatness, Perpendicularity and Strightness of test specimen and mouls as specified by EN 12390-1. They are available, on request, complete with certificate of calibration issued by a competent authority such as NAMAS, ACCREDIA, COfrac etc.
The identification labels 55-C0100/D, made from PVC, 100×60 mm in size, are used for writing the identification data. The corners can be folded for immersion in the fresc concrete specimen.
Polyuretane cover for Kubo15 mould.
Handle for plastic cube moulds KUBO 55-C0100/P15
