Miscellaneous

86-D1456, 86-D1455, 86-D1430, 86-D1431, 86-D1441, 86-D1440, 86-D1422, 86-D1420
This section includes all the laboratory equipment you need for sample preparation. This covers equipment used for performing chemical procedures, such as the preparation of physical characteristics of a sample to be analyzed. You will also find a range of safety products including gloves, for both lab and on-site use.

Bunsen Burner, Tripods, Wire Gauzes, Tongs

Bunsen burner, Tripods, Wire gauzes, Tongs

Standards EN 12697-33 ASTM D8079

86-D1456, 86-D1455, 86-D1430, 86-D1431, 86-D1441, 86-D1440, 86-D1422, 86-D1420
Description

 

Bunsen burner, Tripods, Wire gauzes, Tongs
Products

 

86-D1420
Bunsen burner universal
 
86-D1430
Tripod dia 100 mm x 150 mm h
 
86-D1431
Tripod dia 150 mm x 230 mm h
 
86-D1440
Iron wire gauze with ceramic centre 150×150 mm
 
86-D1441
Iron wire gauze with ceramic centre 200×200 mm.
 
86-D1455
Stainless steel oven tongs
 
86-D1456
Small tongs

 

Technical Specifications

 

Models

77-PV41C05
77-PV41C06

Machine control

– Vertical load and/or displacement control of the roller segment by stepper motor, measured directly by linear transducer to verify in real time the specimen thickness for more accuracy
– Real time measurement and control with a closed loop logic of compaction load by two precision strain gauge load cells. This system permits to verify possible discrepancies of the compaction due to the wrong distribution of asphalt in the mould and to any other unexpected malfunctions, with warning to the operator
– Machine fitted with sensors to confirm the mould in position and for the automatic set-up of the horizontal travel

Software

– 21” Touchscreen integrated PC
– Fully programmable PC software operating in Windows®
– Set up of customized compaction sequence as free combination of load/displacement controlled cycles
– Selection, customization and storing of test parameters
– Customization of the compacting sequence to be saved and recalled from the database
– Graphic display of displacement / force vs. number of passes or load vs. displacement

Max. vertical force

30 kN

Load measurement

By two precision load cell

Compacting device

Roller segment, radius 535 mm

Back and forth horizontal travel

Adjustable: 300/320 mm
400 mm
500 mm
By software

Trolley speed

Adjustable up to 300 mm/s
Adjustable pause at inversion point

Mould dimensions*

320 x 260 x 195 mm
300 x 300 x 195 mm
400 x 300 x 195 mm
500 x 300 x 195 mm
500 x 400 x 195 mm

Roller vibration

Yes, adjustable frequency from 10 to 50 Hz (optional)

Heated foot

Yes (optional)

Heated base

Yes (optional)

Electrical supply

380 V, 50 Hz, 3 ph, or
220 V, 60 Hz, 3 ph

Power rating

3000 W

*To produce slabs down to 38 mm thickness. Maximum slab thickness varies with bitumen mixes composition.

 

Accessories and Spare Parts
 
Code:77-PV41C00/UP
Upgrade of 77-PV41C0X with heating system inbuild in mould base support
Code:77-PV42001
Interchangeable sector head to produce slabs 320 mm long x 260 mm wide
Code:77-PV42011
Interchangeable sector head to produce slabs 320 mm long x 260 mm wide. Complete with heating system
Code:77-PV42102
Steel mould 320×260 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV43001
Interchangeable sector head to produce slabs 300 mm long x 300 mm wide
Code:77-PV43011
Interchangeable sector head to produce slabs 300 mm long x 300 mm wide. Complete with heating system
Code:77-PV43012
Compaction sector head heating system for 77-PV41C0x and 77-PV41A0x series
Code:77-PV43042
Motor vibrator roller option. For 380V/50Hz/3ph, 220V/60Hz/3ph, 110-230V/50-60Hz/1ph models.
Code:77-PV43102
Steel mould 300×300 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV44001
Interchangeable sector head to produce slabs 400 mm long x 300 mm wide
Code:77-PV44011
Interchangeable sector head to produce slabs 400 mm long x 300 mm wide. Complete with heating system
Code:77-PV44102 Steel mould 400×300 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV45001
Interchangeable sector head to produce slabs 500 mm long x 300 mm wide
Code:77-PV45011 Interchangeable sector head to produce slabs 500 mm long x 300 mm wide. Complete with heating system
Code:77-PV45102
Steel mould 500×300 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV46001
Interchangeable sector head to produce slabs 500 mm long x 400 mm wide
Code:77-PV46011
Interchangeable sector head to produce slabs 500 mm long x 400 mm wide. Complete with heating system
Code:77-PV46102
Steel mould 500×400 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
 

Gloves

Different types of gloves for all laboratory requirements

Standards ASTM D7981

86-D1529
Products

 

86-D1529
Heavy duty heat resistant gloves (450°C)
 
86-D1530
Heat resistant gloves (pair)
 
86-D1531
Neoprene gloves (pair)
 
86-D1532
Cotton gloves with leather palms
 
86-D1533
Soft leather gloves (pair)
 
86-D1534
Rubber PVC gloves – pair

Support Bases, Sleeves , Clamps

Support bases, Sleeves and Clamps

86-D1445, 86-D1446
Description

 

Support bases, Sleeves and Clamps 

 

 
 
Products
 
 
86-D1445
Support base 200 x 130 mm rod 10 mm dia x 500 mm
 
86-D1446
Support base 280 x 160 mm rod 800 x 12 mm dia
 
86-D1450
Double sleeve metal/metal
 
86-D1451
Double sleeve metal/glass
 
86-D1452
Small clamp
 
86-D1453
Large clamp
Technical Specifications

Models

77-PV41A02
77-PV41A04

Machine control

– Vertical displacement of the roller segment by brushless motor measured directly by encoder to verify in real time the specimen thickness
– Machine fitted with sensors to confirm the mould in position and for the automatic set-up of the horizontal travel

Firmware

Set up of compaction procedure with displacement control with load, density or thickness limit.
– Selection, customization and storing of test parameters
– Customization of the compacting procedure to be saved and recalled from the data base
– Graphic display of roller vertical displacement vs. number of passes
– Possibility to pre-set a load threshold to start compaction at the contact of the sector head with the specimen

Max. vertical force

30 kN

Compacting device

Roller segment, radius 535 mm

Back and forth horizontal travel

Adjustable: 300/320 mm
400 mm
500 mm
By control panel

Trolley speed

Adjustable up to 300 mm/s
Adjustable pause at inversion point

Mould dimensions*

320 x 260 x 195 mm
300 x 300 x 195mm
400 x 300 x 195mm
500 x 300 x 195mm
500 x 400 x 195mm

Roller vibration

Yes, adjustable frequency from 10 to 50 Hz (optional)

Heated foot

Yes (optional)

Electrical supply

220 V, 50 Hz, 1 ph, or
110 V, 60 Hz, 1 ph

Power rating

3000 WE

Overall dimensions
(l x w x h)

1300 x 800 x 2040 mm

Weight approx.

650 kg

*To produce slabs down to 38 mm thickness. Maximum slab thickness varies with bitumen mixes composition.

Accessories and Spare Parts
Code:77-PV42001
Interchangeable sector head to produce slabs 320 mm long x 260 mm wide
Code:77-PV42011
Interchangeable sector head to produce slabs 320 mm long x 260 mm wide. Complete with heating system
Code:77-PV42102
Steel mould 320×260 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV43001
Interchangeable sector head to produce slabs 300 mm long x 300 mm wide
Code:77-PV43011
Interchangeable sector head to produce slabs 300 mm long x 300 mm wide. Complete with heating system
77-PV43012
Compaction sector head heating system for 77-PV41C0x and 77-PV41A0x series
77-PV43042
Motor vibrator roller option. For 380V/50Hz/3ph, 220V/60Hz/3ph, 110-230V/50-60Hz/1ph models.
Code:77-PV43102
Steel mould 300×300 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV44001
Interchangeable sector head to produce slabs 400 mm long x 300 mm wide
Code:77-PV44011
Interchangeable sector head to produce slabs 400 mm long x 300 mm wide. Complete with heating system
Code:77-PV44102
Steel mould 400×300 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
77-PV45001
Interchangeable sector head to produce slabs 500 mm long x 300 mm wide
Code:77-PV45011
Interchangeable sector head to produce slabs 500 mm long x 300 mm wide. Complete with heating system
Code:77-PV45102
Steel mould 500×300 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor
Code:77-PV46001
Interchangeable sector head to produce slabs 500 mm long x 400 mm wide
Code:77-PV46011
Interchangeable sector head to produce slabs 500 mm long x 400 mm wide. Complete with heating system
77-PV46102
Steel mould 500×400 mm, 195 mm high, to be filled at 155 mm max, for PV41XXX electromechanical slab compactor

Ask our materials testing experts. We’re here to help.

Contact Us