The apparatus consists of a stainless steel crown with 16 bars 18 mm diameter.
Standards EN 12350-12
Used for determining the passing ability (measured by the blocking step), the flow spread and t500 flow time of the self compacting concrete as the concrete flows through the J-Ring. The apparatus consists of a stainless steel crown with 16 bars 18 mm dia.
The apparatus consists of a L shaped stainless steel frame, supplied complete with filling hopper.
Standards EN 12350-10
Used for determining the passing ratio of self compacting concrete.
The apparatus consists of a L shaped stainless steel frame, supplied complete with filling hopper.
The test is performed for determining the slump flow and t500 time for self-compacting concrete.
Standards EN 12350-8
The test is performed for determining the slump flow and t500 time for self-compacting concrete. The test is not suitable when the maximum size of the aggregate exceed 40 mm. The test is performed with the slump cone and steel plate.
The SCC slump cone, made from sheet steel protected against corrosion, has a top dia. of 100 mm, base dia. of 200 mm and 300 mm height.
The steel plate, 900×900 mm, have engraved circles of 210 and 500 mm dia.
Used for determining the sieve segregation resistance of self-compacting concrete.
Standards EN 12350-11
Used for determining the sieve segregation resistance of self-compacting concrete. This method is not applicable to concrete containing fibres or lightweight aggregates.
The set includes a 300 mm dia. test sieve with perforated plate 5 mm opening, pan and plastic bucket 11 l cap.
The apparatus consists of a stainless steel V shaped frame fit with a watertight sliding gate...
Standards EN 12350-9
Used to determine the V-funnel flow time. The test is not suitable when the maximum size of the aggregate exceeds 20 mm.
The apparatus consists of a stainless steel V shaped frame fit with a watertight sliding gate and supported by a frame to assure the top funnel horizontal.
