Used for determining the expansion of cement. The mould consists of a spring tensioned..
Standards EN 196-3
Introduction
Used for determining the expansion of cement. The mould consists of a spring tensioned split cylinder 30 mm internal diameter, 30 mm high with two indicator stems which measure 165 mm from the points of thje centre line of the cylinder and O ring. Two or three moulds are required for each test. To perform the test, a water bath is also required. See accessories.
We propose three packages:
62-L0025 Le Chatelier mould
Single unit. Individually checked, supplied complete with certificate of conformity and identified by a serial number.
62-L0025/C Le Chatelier mould. Pack of 6 units
Same as 62-L0025.
62-L0025/B Le Chatelier soundness kit
The kit includes all accessories to perform the test and to verify the conformity of the moulds.
Consisting of:
Note: each one of the above parts can be purchased individually.
These apparatus have been designed to determine the bair content in cement mortar, cement past
Standards EN 459-2 EN 413-2 EN 1015-7
These apparatus have been designed to determine the bair content in cement mortar, cement paste, and lime mortar. The testers are made of cast aluminium. The test pot and the upper part are sealed air-tight together by means of two quick-action spring clamps. The air ia compressed by means of a built-in hand pump. This air pump and the push buttons TEST and CORRECTION are arranged in a simple-to-use configuration on the front plate. The pressure gauge is installed recessed in the head of the meter. The scale has an indication range of o-50 volumetric %. The two models are practically identical except for the capacity. The 64-C0171 model, I liter capacity, is conforming to the EN 459-2 whilst the 64-C0171/A, 0.75 liter capacity is conforming to EN 413-2 standards. Both models can be supplied, on request, in the electric operated version.
Used for determining the bulk density of lime by the fall of the sample from a standard height into
Standards EN 459-2
Used for determining the bulk density of lime by the fall of the sample from a standard height into a container. Consisting of a cylindrical container I liter cap., hopper and spring loaded yoke.
Used to determine the consistency of mortars and building lime.
Standards EN 459-2 EN 1015-3 ASTM C230 EN 13279-2 EN 1015-3
Used to determine the consistency of mortars and building lime. Two versions available: conforming to EN and ASTM standards, manual and motor operated.
Motor operated models are driven by a motor speed reducer and the number of drops are preset on the digital counter, which stops automatically the machine at the end of the cycle. Supplied complete with flow mould and tamper. EN versions include also the filling hopper.
Motorised flow table with digital counter. Supplied complete with flow mould and tamper. Conforming to ASTM C230. User interface: large size graphic display and membrane keyboard. 230V, 50Hz, 1ph.
Flow table complete with mould. Hand operated. Supplied complete with flow mould and tamper. Conforming to ASTM C230
Motorised flow table with digital counter. Supplied complete with flow mould and tamper. Conforming to ASTM C230. User interface: large size graphic display and membrane keyboard. 220V, 60Hz, 1ph.
Motorised flow table with digital counter. Supplied complete with flow mould and tamper. Conforming to ASTM C230. User interface: large size graphic display and membrane keyboard. 110V, 60Hz, 1ph.
Hand operated flow table for building lime. Supplied complete with flow mould, hopper and tamper. Compliant with EN 459-2, 13279-2, 1015-3
Used for the determination of the carbon dioxide in lime.
Standards EN 459-2
Used for the determination of the carbon dioxide in lime. Consisting essentially of a decomposition flask 50 ml cap., of an absorption vessel to contain the potassium hydroxide solution, a measuring burette, funnel stopcocks, connections and wooden stand. To perform the test, a hot plate with magnetic stirre and an adjustable height support are alo required. See accessories.
Hot plate maximum temperature 280°C and magnetic stirrer, 100 to 1500 rpm. capacity 3 liters.
200-240V. 50-60 Hz, 1 ph
Used for the determination of the soundness of hydrated lime and gypsum plasters.
Standards EN 196 EN 459-2 BS 1191
Used for the determination of the soundness of hydrated lime and gypsum plasters. The mould is 100 mm dia. x 5 mm deep with an internal taper of 5°. It is supplied complete with glass plate. Three are required for each test.
Brass ring mould
62-L0037 Brass ring mould
Standards EN 459-2 EN 413-2
Used for determining the consistency of masonry cement and building limes. Consisting of a steel base with recess to house the test cup and the vertical column holding the penetration plunger assembly. The height of drop is 100 mm and the weight of plunger assembly is 90 g. Supplied complete with test cup 80 mm dia. x 70 mm deep and tamper.
Ground quicklime shall be tested for their reactivity with this apparatus which consists essentia
Standards EN 459-2
64-L0035/D – digital version:
For use with le-chatelier-moulds for the determination of the soundness of building lime
Standards EN 459-2
For use with le-chatelier-moulds for the determination of the soundness of building lime which is subjected to the continuous action of steam at atmospheric pressure for a period of 180±10 min. Stainless steel internal chamber housed in a stainless steel insulated exterior case
